Custom Name Plate – Flush Surface

Instructions to edit text:

1. Rotate plate to view from underneath.
2. Click on “Objects” tab under the Filament selection.
3. Right click on “Name Text – Edit This”,  and “Title Text-Edit This”, and edit the text, font, and size. Note that this was created using the PC version of Bambu Studio so the text might be different on a Mac. Simply change the font type to your choosing. 
4. Click “Slice Plate”.
5. Warning Verify that the text and the name plate are both on the first layer. If not, move the name plate down to the first layer or start the process over. Sometimes during the manipulation of the text, the bodies move slightly. Do not print unless everything is flush on first layer!
6. For best text results, verify that the color of the nameplate prints before the color of the text. Click the hexagon settings button on the plate to verify the first layer sequence.
7. Important, let the bed completely cool before pulling off  to prevent warping!

The default settings do not include a brim, but please add one or increase the bed temp if you are worried about bed adhesion.